英语
中文简体Companies now use scrubbers instead of manual cleaning to improve cleaning quality, cleaning effect, cleaning efficiency and reduce labor costs. Therefore, with the advancement of technology and the passage of time, more and more companies use scrubbers, but Some customers will experience insufficient suction power of the scrubber after using the scrubber for a period of time. What should we do if this happens?
1. Check whether the rubber strip is dirty, if so, clean it in time to remove the dirt;
2. Check whether the rubber strip is severely worn or damaged. If it is found to be severely worn, replace the rubber strip in time;
3. Check whether the filter sponge is clogged, and it needs to be cleaned to make it clean and transparent;
4. Check whether the sewage drain cover is well covered;
5. Check whether the suction cup sealing ring and connecting hose are damaged, whether the connecting hose joint is leaking or falling off. If there is any damage, replace the suction cup sealing ring or connecting hose assembly in time; if it leaks or falls off, reconnect it;
6. Check whether the full float ball of the sewage tank can be reset. If the sewage cannot be removed, remove the foreign matter on the float frame and the float ball, and ensure the floatability of the float ball to ensure the suction when washing the floor;
7. Check whether the squeegee of the scrubber is damaged, whether the squeegee is adjusted to the proper position, replace the squeegee with a new one, adjust the universal wheel so that the position of the squeegee can reach the sewage that can clean the ground;
8. Check whether the recovery tank is damaged. If it is damaged, replace it with a new recovery tank.
https://www.scrubbermachine.net/
